Untitled Document

Established in the 1970’s Malvern have built an unrivalled reputation for quality and service within the garden building industry. The Traditional range of garden buildings are made using only the finest raw materials available, which will provide many years of enjoyment. Quality design, quality construction, all delivered and installed by their own teams of quality installers. Important points to note: - All buildings are fully guaranteed to be free from defects and faulty installation for a period of 12 months. - Timber is an organic product, subject to naturally occurring changes that result from different environmental conditions i.e. changes in colour, surface, splits and shrinkage. We cannot accept responsibility for these natural changes. - All base work is the responsibility of the customer as is the safe securing of the building once erected. We require a level solid base, either paving slabs or concrete upon which to install your building. Pressure treated floor bearers laid on top of your prepared base are an important and valuable option as they allow the circulation of air underneath the timber floor and help to keep it dry and sound. - Please allow for as much room as possible around the building for their installers to work during installation. - Their installers will need a clear access to carry building sections from the vehicle to your prepared base, with no height restrictions or tight, sharp corners to negotiate. Their installers cannot lift sections over fences more than 4’ in height or over buildings such as garages. If the only access is through the house a straight run is required, many sections will not pass through doorways. Please advise us in advance if there are any difficulties regarding access. - Always make allowance for any roof overhang when buildings have to go into confined spaces All of our buildings are treated with a good quality preservative on the inside, as well as the outside, prior to leaving the factory. We recommend that you re-treat your buildings at regular intervals to maintain the appearance and lifespan of your building. - Cedar buildings are cedar clad only i.e. they have deal framing, floors, roofs and verandahs. - Ironmongery is black japanned, galvanised, brass or brass plated. - Glass is 3mm horticultural or 4mm toughened float glass. - All roofs are protected with a layer of green or optional red mineral felt. - All timber sizes stated are finished sizes i.e. after machining. Please note that finished sizes can vary by plus or minus 1mm. - All building dimensions stated are approximate, based on external wall sizes. - All timber used in the construction of our buildings originates from sustainable forests.
	THE BEWDLEY APEX
8' x 8' Bewdley Apex shed with optional double doors	Specification: Sizes: 4' x 4' (1.82m x 1.22m) up to 10' x 8' (3.04m x 2.44m) Eaves height (internal): 5' 6" (1.68m) Ridge heights (internal): 6' 3" (1.9m) on 4' width 6' 5" (1.95m) on 5' width 6' 8" (2.03m) on 6' width 7' 1" (2.16m) on 8' width Door sizes: 5'7" x 2' 2 " (1.70m x 0.66m) on 4' width 5' 7" x 2' 11" (1.70m x 0.89m) on 5' width 5' 10" x 2' 11" (1.79m x 0.89m) on 6' & 8' widths Optional double doors on 8' wide are 5' 10" x 5' (1.78m x 1.2m) Windows: 1 fixed & 2 on 10' deep models Cladding: 12mm tongue and grooved deal shiplap Framing: 33mm x 33mm deal
	THE BEWDLEY PENT
7' x 5' Bewdley Pent shed with door on left	Specification: Sizes: 6' x 4' (1.82m x 1.22m) up to 10' x 8' (2.44m x 1.82m) Rear height (internal): 5' 10 " (1.79m) Front height (internal): 6' 7 " (2.02m) Door sizes: 5' 10 " x 2' 2 " (1.79m x 0.66m) on 4' width and 5' 10" x 2' 11" (1.79 x 0.89m) on all others 2 black japanned hinges Windows: 1 fixed Cladding: Tongue and grooved 12mm deal shiplap Framing: 33mm x 33mm deal
	THE MALVERN HEAVY DUTY APEX SHED
8' x 6' pressure treated Malvern Apex with optional pressure treated timber slatted roof 12' x 8' deal Malvern Apex	Standard Features: Heavy duty framing throughout. Joinery made windows. Fully framed, ledged and braced door hung with 3 heavy duty antique style hinges. Toughened glass. Door has a built in 3 lever mortice lock. Spirit base timber treatment throughout excluding pressure treated deal Options Available: Security pack for doors. Solid timber slatted roof. Full length work bench. Stable door. Pressure treated floor bearers. Pent sheds have four possible door positions: Left of front, right of front, left hand end and right hand end. Specification: Sizes: 6' x 4' (1.82m x 1.22m) up to 20' x 12' (6.1m x 3.66m) Eaves height (internal): 5'11" (1.80m) Ridge heights (internal): 6'5" (1.95m) on 4' wide 6 ' 8"(2.03m) on 5' wide 7' 4" (2.23m) on 6' wide 7' 9" (2.36) on 8' wide 8' 2" (2.49m) on 10' wide 8' 8" (2.64m) on 12' wide Door size: 2' 11" (0.89m) wide single door Framing: 48mm x 48mm deal Cladding: A choice of 12mm tongue and grooved deal, pressure treated deal, cedar or 20mm deal shiplap.	6' x 4' Cedar Malvern Apex with optional cedar slatted roof (shown here with single window) 12' x 8' heavy duty pressure treated with double doors and pressure treated slatted roof
	THE MALVERN HEAVY DUTY PENT SHED
12' x 8' Deal Malvern Pent shed showing door on left of front	Specification: Sizes:6' x 4' (1.82m x 1.22m) up to 16' x 8' (4.88m x 2.44m) Rear height (internal): 5'11" (1.80m) Front height (internal): 7 ' (2.13m) Door size: 5'10" x 2' 11" (1.82m x 0.89m) wide single door Framing: 48mm x 48mm deal Cladding: A choice of 12mm tongue and grooved deal, pressure treated deal, cedar or 20mm deal shiplap.	8' x 6' Deal Malvern Pent
	THE WORCESTER CORNER SHED
6' 8" x 6' 8" Deal Worcester shed	Standard Features: 2 joinery made opening windows. Toughened Glass. Full framed, ledged and braced 35" wide hung door with 3 heavy duty 'antique' style hinges. Door has built-in 3 lever mortice lock. Spirit based treatment throughout Options Available: Stable Door. Pressure treated floor bearers. Specification: Sizes: 6'8" x 6'8"(2.03m x 2.03m) and 7'8" x 7'8" (2.33m x 2.33m) Rear height (internal): 6'2 " (1.85m) Front height (internal): 7'4" (2.24m) Door Size: 5'10" x 2'11" (1.83m x 0.89m) wide single door Framing: 33mm x 45mm deal Cladding: A choice of 12mm tongue and grooved deal, cedar or 15mm deal logroll shiplap	6'8" x 6'8" deal Worcester Corner Shed with optional stable door
	THE LUDLOW
6' x 8' deal Ludlow with optional stable door	Standard Features: Heavy duty framing throughout. Full framed, ledged and braced 35" wide hung door with 3 heavy duty antique style hinges. Door has been built in 3 lever mortice lock. Two joinery made fixed windows. Toughened Glass. Front roof overhang. Spirit based treatment throughout excluding pressure treated deal. Options Available: Timber slatted roof. Stable Door. Pressure treated floor bearers. Specification: Sizes: 8' x 6' (2.44m x 1.83m) up to 12' x 10' deep (3.66m x 3.04m) Eaves height (internal): 5'11" (1.80m) Ridge heights (internal): 8' wide 7' 9" (2.36m) 10' wide 8'2" (2.49m) 12' wide 8'8" (2.64m) Door size: 5' 10 " x 2'11" (1.82m x 0.89m) wide single door Framing: 48mm x 48mm deal Cladding: A choice of 12mm tongue and grooved deal, pressure treated deal, cedar or 20mm deal shiplap	6' x 8' pressure treated with optional stable door
	THE SOLAR
8' x 8' cedar Solar with optional stable door in right hand end	Standard Features Full width staging under windows. One opening window. Toughened glass throughout. Side Windows. Front roof overhang. Spirit based timber treatment throughout excluding pressure treated. Options Available Stable Door. Pressure treated floor bearers. Specification: Sizes: From 6' x 6' (1.83m x 1.83m) up to 10' x 8' (3.05m x 2.44m) Rear Height (Internal): 6' 4" (1.93m) Front Height (Internal): 7' 1" (2.16m) Door: 2'11" (0.89m) wide single door Cladding: A choice of 12mm tongue and grooved deal, pressure treated deal, cedar or 15mm deal logroll shiplap. Framing: 48mm x 48mm
	THE WITLEY SHED
10' x 8' deal Witley	Standard Features Fully framed, ledged and braced double doors. Elevated eaves height. Heavy duty antique style door hinges. Doors have a built in 3 lever mortice lock. Toughened glass. Heavy duty framing throughout. Spirit based timber treatment throughout excluding pressure treated. Options Available Solid timber slatted roof. Full length workbench. Security pack for doors. Pressure treated floor bearers Specification: Sizes: 8' x 6' wide (2.44m x 1.83m) up to 20' x 12' wide (6.10m x 3.66m) Eaves Height (Internal): 6' 8" (2.03m) Ridge Height (Internal): 8' 1" (2.46m) on 6' wide 8'6" (2.59m) on 8' wide 8' 11" (2.72m) on 10' wide 9'5" (2.87m) on 12' wide Door: 4'6" (1.37m) wide double doors on the 8', 10' and 12' deep models. 5'10" (1.78m) wide double doors on the 14' wide and above Cladding: A choice of 12mm tongue and grooved deal, pressure treated deal, cedar or 20mm deal shiplap. Framing: 48mm x 48mm
	THE BARNSTYLE SHED
12' x8' wide pressure treated feather edge with optional pressure treated timber slatted roof.	Standard Features 23mm pressure treated feather edged heavy duty cladding. Pressure treated heavy duty floor. Elevated eaves height. Fully framed, ledged and braced 5'10" double doors. Toughened glass. Heavy duty antique style door hinges. Doors have a built in 3 lever mortice lock. Heavy duty framing throughout. Pressure treated timber throughout. Options Available Pressure treated timber slatted roof. Full length workbench. Security pack for doors. Pressure treated floor bearers. Specification: Sizes: 8' x 8' wide (2.44m x 2.44m) up to 20' x 12' wide (6.10m x 3.66m) Eaves Height (Internal): 6' 8" (2.03m) Ridge Height (Internal): 8'6" (2.59m) on 8' wide 8' 11" (2.72m) on 10' wide 9'5" (2.87m) on 12' wide Door: 5'10" (1.78m) wide double doors Cladding: 23mm feather edge pressure treated deal Framing: 48mm x 48mm pressure treated deal
	THE BUNKER
	Specification Sizes: 6' x 2'7" (1.83m x 0.78m) and 4' x 2'7" (1.21m x 0.78m) Front Height: 2'7" (0.78m) Rear Height: 3'2" (0.96m) Framing: 33mm x 33mm Cladding: A choice of 12mm tongue and groove deal or pressure treated deal shiplap
	THE TOOLSTORE
	Specification: Sizes: 6' x 2'7" (1.82m x 0.78m) and 4' x 2'7" (1.21m x 0.78m) Front Height: 5'4" (1.62m) Rear Height: 5'8" (1.72m) Cladding: A choice of 12mm tongue and groove deal or pressure treated deal shiplap Framing: 33mm x 33mm deal Doors: 4' (1.22m) double doors on the 6' wide model 2'1" (0.63m) single door on the 4' wide model
	THE TIDYSTORE
	Specification: Sizes: 6' x 2'9" (1.82m x 0.81m) and 4' x 2'9" (1.21m x 0.84m) Front Height: 5'6" (1.68m) Rear Height: 5'4" (1.57m) Cladding: 12mm tongue and groove pressure treated deal shiplap Framing: 33mm x 33mm deal Doors: 4' (1.22m) double doors on the 6' wide model 2'1" (0.63m) single door on the 4' wide model Note: Roof is not felted, therefore it is not watertight