Elite Greenhouse Range
ABOUT ELITE GREENHOUSES
Elite greenhouses has been established for over 80 years and is still at the forefront of the domestic greenhouse market. Boasting a reputation for quality, value, range, and service which you will find hard to match.
Whatever your greenhouse budget, Elite has the capacity to cater for all.
We can not guarantee the weather, but what we can guarantee is a great product.
These common elements can be found in all Elite's Products...
1. All components conform to British Standards
2. With the exception of the Cold Frame, the aluminium gutters are built in as standard which add additional strength to the existing structure and allow for a rainwater collection kit to be fitted to collect and recycle the rainwater.
3. Stainless steel clips are used throughout which eradicate the fears of rust, warp and rot.
4. All buildings, with the exception of the Window Garden and 2’ long R-Type, come with at least one 4ft sq roof vent. Depending upon what the building is going to be used for, additional roof vents and side louvres can be purchased.
5. Fingertip sliding door(s) (not hinged) provide easy use.
6. Gutter, ridge and cills are in full lengths up to 20'. 7. If you require a base, Elite only supply bases made from aluminium. Removing the fear of rust, rot or warping and can also be powder coated to suit any greenhouse, unlike other base materials.
8. All of our frames come with a 10 year guarantee as standard.
On all Elite models the following glazing types are available..
.
Horticultural glass Available in 3mm thick overlapping glass sheets.

Toughened safety glass In the event of a breakage, the glass granulates removing any danger of injury. Elite only use Grade A toughened glass to EN 12150 which is primarily in full length sheets providing a neater finish, especially with bar capping, and removes any overlapping glass where algae and moss can often be a problem.

Polycarbonate UVI treated 6mm thick, twin wall with silvered edges and, like the toughened safety glass, it comes in full sheets and is a great option where children and pets are concerned.

Bar Capping provides a stronger hold for the glazing, and also adds a decorative finish to any greenhouse. The rubber fin also adds a better water seal between the frame and glass. Capping is used in addition to wire clips so in effect will add double protection which is ideal in more exposed areas.
  4' 3" WIDE - COMPACT
Compact 4' x 4' (nominal), integral base, alloy, full sheet toughened glass
Packed with many features found on larger models, the Compact offers a surprisingly spacious gardening experience with an eave height of 5’ 1¼”, ideal for the beginner or modern styled garden where space is at a premium.
Available in unlimited lengths from 4' 5".

STANDARD FEATURES
Integral gutter
Drop door

Roof Vent
Double doors
Cambered cill

Recommended accessories
12" wide double tier staging, standard rain water kit, crestings and finials, bar capping and elite auto vent.
  4' 3" WIDE - MAXIM
Maxim
When space is at a premium, look no further than the Maxim from Elite. Offering an additional 7" of roof height than the Compact, the Maxim swells the growing area immensely yet still remains within its 4' 3" foot print. With double doors and cantilever braces as standard, the Maxim is ideally suited for smaller gardens and courtyards.
Available in unlimited lengths from 4' 5".
STANDARD FEATURES
Integral gutter
Cantilever brace

Roof Vent
Double doors
Cambered cill

Recommended accessories
Standard rain water kit, wooden staging 4' x 14', 5 blade louvre, diamond staging 3 salt and diamond shelf.
5' 3" WIDE STREAMLINE
8' x 5' (nominal), integral base, alloy, full sheet toughened glass

Using the core elements found in the compact, the Streamline boasts additional working areas for the grower with bigger ideas yet ideally suited for small gardens or country courtyards.
Available in unlimited lengths from 4' 5".

STANDARD FEATURES

Integral gutter
Drop door

Roof Vent
Double doors
Cambered cill

Recommended accessories

18" wide double tier staging, s
tandard rain water kit, crestings and finials, bar capping and auto vent.

  5' 3" WIDE DELTA
Delta
Providing a stunning additional 11" of roof height than the Streamline generates an immense growing volume and with double doors and cantilever braces as standard, the Delta is a powerhouse product from such a modest footprint.
Available in unlimited lengths from 4' 5".
STANDARD FEATURES

Integral gutter
Cantilever brace

Roof Vent
Double doors
Cambered cill

Recommended accessories

5 blade louvre, wooden staging 4' x 14', 19" wide diamond staging, diamond staging 3 slat and diamond shelf.
  6' 3" WIDE CRAFTSMAN  
Craftsman 4' x 6' (nominal), integral base, brown, full sheet toughened glass
Designed with the grower in mind, the Craftsman is a popular choice for the beginner or enthusiast thanks to its ideal working areas and excellent storage space.
Available in unlimited lengths from 4'5".
STANDARD FEATURES
Integral gutter
Drop door
Single door catch
Roof vent
Cambered Cill

Recommended accessories
Diamond shelf, standard rain water kit, cresting and finials, 19" wide diamond staging and auto vents.
 
  6' 3" WIDE HIGH EAVE  
High Eave 8' x 6'  (nominal), integral base, alloy, full sheet toughened glass
Taking the Craftsman's ethos to another level, the extra cantilever bracing allows the High Eave to boast an additional 11” growing area compared with the standard model. A truly cavernous working space yet still remaining within the same 6' 3" foot print.
Available in unlimited lengths from 4'5".
STANDARD FEATURES

Integral gutter
Drop door
Cantilever brace
Roof vent
Cambered Cill

Recommended accessories
5 blade louvre, all slatted bench, 1"' wide diamond staging, 6' wide extruded shelf and partition
 
  7' 5 " WIDE - VANTAGE  
Vantage
Finally there is no need for a compromise. If you want the growing area but just do not quite have the space, then the Vantage is the ideal candidate. Weighing in at 7' 5"wide, this all new size includes double doors and cantilever braces, a superb growing area and culminates in something to be proud of.
Available in unlimited lengths from 4'5".
STANDARD FEATURES
Integral gutter
Double door
Cantilever brace
Roof vent
Cambered Cill

Recommended accessories
5 blade louvre, all slatted bench, 26'"wide diamond staging, auto vent and partition
 
  8' 5" WIDE BELMONT  
Belmont 12' x 8' (nominal), integral base, single door, alloy,  full sheet toughened glass

Belmont 4' x 8' (nominal), integral base, single door, green,  full sheet toughened glass

A must for the seasoned grower, the stunning Belmont maximises the gardening experience from its 8' 5" frame. Optional extras such as internal partitions and double doors make this a superb all round performer and an ideal choice.
Available in unlimited lengths from 4'5".
STANDARD FEATURES
Integral gutter
Roof vent
Cantilever brace
Drop door
Cambered cill

Recommended accessories
Connecting gutter system
Cresting and finials
26" wide diamond staging
Auto louvre
Partition

Double doors
5 blade louvre
Heavy duty wooden staging
Diamond shelf
Auto Vent

 
  10' 6" WIDE SUPREME  
Supreme 20' x 10' (nominal), green, horticultural glass
The choice of the professional, the Supreme is geared towards the more spacious garden setting. The standard make-up including five blade louvre vents and 8ft shelving provides a high performance greenhouse to accommodate any enthusiast's needs.
Available in unlimited lengths from 4'5".

STANDARD FEATURES

Integral gutter
5 blade louvre
Cantilever brace
Double doors
6" wide extruded shelf

Recommended accessories
Super warm 10 heater
Potting Bench
Partition
Heavy duty staging 4' x 24'
Potting Tidy
 
  12' 6" WIDE CLASSIQUE  
Classique 16' x 12' (nominal), alloy, horticultural glass
The ultimate gardening experience is found within the framework of the Classique. This leviathan of greenhouses bulges with growing potential from its incredible working area making for a sensational glasshouse ideal for the larger garden.
Available in unlimited lengths from 4'5".

STANDARD FEATURES
Integral gutter
5 blade louvre
Cantilever brace
Double doors
6" wide extruded shelf

Recommended accessories
Connecting gutter system
Water barrel
Heavy duty wooden staging
Heavy duty staging 6' x 30"
Auto vent

 
  R-TYPE GREENHOUSE  
R-Type Greenhouse
Offering flexibility for your gardening space; the R-type can fit into your garden set-up through the removal of the framework's rear end thus allowing it to become an integral part of a wall, shed or garage.
The important consideration with the R-type is the apex width, the section of the framework which will attach to your designated area, which is governed by the width of any of our freestanding models. Once you have chosen your desired R-type, it can then be made to any required length from the wall and the standard features available to the traditional model will then apply.
 
  R-TYPE LEAN-TO  
R-Type Lean-To
The Lean-to R-type offers similar principles allowing flexibility to the gardener regardless of the growing space available.
Through the removal of its gable end, the Lean-to R-type allows not only the length section of the framework to be attached to a wall but also one of the gable ends making it ideal to fit into a restrictive space with two walls, such as an alcove or any L shaped area.
Simply decide how far you would like the building to extend from the wall which is governed by the models available. The R-type, like the traditional Lean-to, can then be made to any length and the desired gable end will be removed once your order has been confirmed.
Once you have chosen your desired R-type, the standard features available to the traditional model will then apply.
 
  KENSINGTON  
Kensington
The Kensington range allows you to bring the garden to the home while not compromising the benefits of a greenhouse.
Manufactured to any length, there are no limits when it comes to the three width sizes found in the Kensington range. Packed full of features found in our free standing models, these lean-to greenhouses bring the joys of the garden into the home.
Available in unlimited lengths from 4' 4". Available widths 4' 4", 6' 4" and 8' 4".
STANDARD FEATURES
Lean -to-gutter
Roof vent
5 blade louvre
Single door catch
6"wide extruded shelf
Recommended accessories
Auto Louvre
Lean-to rain kit
Auto vent
20" wide triple tier staging
Separate aluminium base
 
  2'3" EASYGROW  
Easygrow
The easygrow is a mini lean-to built to accommodate space requirements without compromising quality or purpose.
Available in unlimited lengths from 4'5".

STANDARD FEATURES

Single door catch
Integral gutter
Roof vent
Recommended accessories

Separate 5" aluminum base
Lean-to rain kit
Bayliss XL auto vent
6"wide extruded shelf
23" wide triple tier staging
 
  4'4 " WINDSOR  
Windsor 6' x 4' (nominal) seperate 5" alloy base, alloy,full sheet toughened glass
A lower ridge height of 6’ 7”, ideal for attachment to garages and sheds, is one of the main attractions of the Windsor making it a popular choice amongst gardeners.
Available in unlimited lengths from 4'5".

STANDARD FEATURES

Single door catch
Integral gutter
Roof vent
Recommended accessories

Separate 5" aluminum base
Lean-to rain kit
Bayliss XL auto vent
6"wide extruded shelf
23" wide triple tier staging
 
  COLDFRAME  
Coldframe
The Cold Frame is a must to "bring on" small plants.
The Cold Frame is 2' wide by 4' or 6' long.
 
  WINDOW GARDEN  
Window Garden
The Window Garden is ideal for houses with little or no garden. Attaches to small walls/sheds. Ideally suited for growbag.
The Window Garden is 1' 5" wide.

 
  DWARF WALL  
Dwarf Wall
A Dwarf Wall modification is applied when the customer requires a building to be cut down in height and constructed on top of a wall to achieve a desired eaves or ridge height. A threshold is to be left in the wall to enable the door step height to be as low as possible. FEATURES/BENEFITS/OPTIONS
These modifications can be applied to any Elite greenhouses with the exception of the Cold Frame, and Window Garden. The features depend upon the model chosen to modify.
Technical information also depends upon the model chosen to modify and the desired heights.
 
  GX 600  
GX 600
Put simply, a GX is the total garden solution for any grower. This powerhouse performs from the moment it arrives as each kit is so crammed full of superb features, all included as standard and developed through Elite's experience and expertise, it literally burst out of the box.
Unlimited length increasing in 2' increments.
STANDARD FEATURES
Ground level door access for wheelbarrows and wheelchairs
Hanging basket rails
Two full length gutter, ridge and cills up to 20'
Two side vents and double roof vents
Double door entry with extra height
Extra high eaves
Strong high-tensile bolts
Extra strong block gable glazing bar
Heavy duty cantilevers
Built in gutters
 
  GX 800  
GX 800
The new Elite GX800 greenhouse range takes greenhouse strength, style and function seriously. Packed with features which would normally attract an extra charge, the GX800 is truly a greenhouse for the future.
Pictured opposite is the 10' 5" x 8' 5" Elite GX800 greenhouse in green finish showing the optional integral staging and ridge crest.
Unlimited length increasing in 2' increments.
STANDARD FEATURES
As GX 600
above.
 
  THYME  
8'3" wide x 10' 5" length, white with brick wall. Wall not included.


Elite Greenhouses are proud to introduce a greenhouse with design and style from yesteryear, fused with a modern twist! The Thyme greenhouse is packed with features including 12inch glazing centres, cantilever bracing, 6ft 2in double sliding doors, ridge cresting and finials ventilation and many more.
As you would expect from Elite Greenhouses, many important features come as standard- rear gable shelf, aluminium base and ground level access to name a few! The 10 year frame guarantee is also a welcome addition for your peace of mind!
The Thyme greenhouse is available in a choice of plain aluminium or powder coated finish (green, black, brown, white or terracotta). Toughened safety glass (EN12150) is supplied as standard, or you can choose polycarbonate glazing (charges will vary).
The greenhouse is available in two widths and unlimited lengths. You also can choose between a freestanding greenhouse or the dwarf wall version!


Recommended accessories
Rainwater kit to one point
Bar capping
Automatic louvre
Auto vent
Diamond staging
Heavy duty wooden staging

 
  DROP DOOR
Drop Door
A Drop Door Modification is applied when the overall height of any building needs to be increased. It involves a brick wall built by the customer to the desired height and a standard height building constructed on top. A threshold is left in the wall for the door(s) to be dropped into, to allow easy access for the user.  
FEATURES/BENEFITS/OPTIONS
These modifications can be applied to any Elite greenhouses with the exception of the Cold Frame and Window Garden. The features depend upon the model chosen to modify.
Technical information also depends upon the model chosen to modify and the desired heights
All sizes are approximate.

If you have any queries or questions please phone us on 01252 718481
or e-mail us at sales@bournebuildings.co.uk